Refrigerator

The  cooling of substances or enclosed spaces to low temperatures is called refrigeration. Refrigeration is used most often to keep foods or medicines from spoiling, since bacterial growth is slowed at lower temperatures. A common example is the home refrigerator, in which foods can be stored for days at temperatures of around 40° F (4° C). Foods kept frozen

at temperatures near 0° F (–18° C) can be stored for months without decay or loss of flavor. Refrigeration is also used commercially for storing food in warehouses and for transporting foodstuffs, biological materials, and certain chemicals. Many vegetables are refrigerated during transit so that they will last longer on store shelves.

Refrigeration is also used to cool hot air and increase comfort in such places as homes and offices. Some applications, such as the manufacture of liquid oxygen or liquid nitrogen, require temperatures below –240° F (–151° C). This is the realm of cryogenics, which deals with matter at very low temperatures. Special equipment is required to produce and maintain these temperatures Natural gas may be cooled to about –265° F (–165° C)—the temperature at which the gas becomes liquid—for transport in specially designed ships. It is stored in refrigerated and insulated tanks.

Strictly speaking, refrigeration is not a natural process. In nature, all processes involving the transfer of heat proceed in the direction that transfers heat from the hotter to the colder body according to the second law of thermodynamics . Thus, heat by itself travels only from hot to cold, and a cold object will eventually reach the temperature of its surroundings. Consequently, an external energy source is required to cool an object and maintain it at a temperature below that of its surroundings. Generally, mechanical or electrical energy sources are used. Once an object is cooled, the transfer of heat from the environment can be slowed—but not stopped completely—by insulating the object. This is accomplished by surrounding the object with materials that have a high resistance to heat transfer, such as the fiberglass and rock wool used in refrigerator walls and house insulation

Types of Refrigeration

If reduced temperatures are required for only a short time, various simple methods of cooling can be used. One of the simplest means of refrigeration, a block of pure ice in a closed container, can keep the temperature in the container at 32° F (0° C), but not lower, until all the ice has melted. Ice can be used to cool objects because a considerable amount of energy, known as the heat of fusion, is required to melt ice. This energy is taken from the surroundings and from objects in contact with the ice.

Evaporation and sublimation.

Another simple method of refrigeration is evaporative cooling. If a liquid is rapidly vaporized, the kinetic energy, or energy of motion of the molecules, increases Much of this energy is drawn from the immediate surroundings, which are therefore cooled. One example of this type of cooling is perspiration: the skin is cooled when sweat evaporates from the surface. In hot, dry climates, inside air can be cooled by injecting water into an air stream blown through a building. As the water evaporates, it cools the stream of air. This principle was used in the so-called “swamp coolers” in the Southwest United States before the use of modern air conditioning became widespread.

Some solid materials convert directly into a gas without first becoming liquid. This phenomenon, known as sublimation, can be used for refrigeration because heat is absorbed from the surroundings during the sublimation process. A common example is the vaporization of solid carbon dioxide, or dry ice, which is used as a refrigerant.Although ice and evaporation or sublimation of a given amount of cooling material can keep temperatures low for a time, other methods of refrigeration, usually mechanical, are used for extended periods of cooling.

Mechanical vapor-compression

refrigeration uses the same fundamental technique of evaporative cooling as described above. The fluid that is vaporized is called the refrigerant, and it is recirculated through a so-called closed cycle. In commonly used mechanical refrigeration systems, there are four basic components: a compressor, a condenser, an expansion valve, and an evaporator. In home refrigerators the evaporator section is the food compartment and its surrounding coils, which contain the refrigerant. The vapor leaving the evaporator section is compressed. The compressed gas is then condensed into a liquid by the condenser, which transfers heat to the external surroundings through coils at the back or bottom of the refrigerator. The liquid is then passed through an expansion valve and fed back into the cold-chamber evaporator, where it absorbs heat as it is vaporized.

For a continuously running refrigerator, a steady cold state is reached when the heat leaking into the unit just equals the heat absorbed by the refrigerant. In practice, however, most refrigerators work only intermittently. If the temperature in the food compartment slightly exceeds the desired temperature, a thermostat activates the compressor motor and the compartment is cooled to just below the required temperature. The compressor is then shut off, to be restarted when the compartment warms up.

The selection of refrigerants depends on the application. Many early refrigerators used ammonia. Ammonia, however, is toxic, and leakage was a constant danger. Starting in the 1920s a series of essentially nonpoisonous synthetic refrigerants was developed that combined carbon, fluorine, chloride, and sometimes hydrogen. The first was dichlorodifluoromethane (CCl₂F₂), commonly known as Freon-12, which is still widely used in refrigeration and air-conditioning systems. Lower temperatures can be reached with Freon-22 (CHClF₂).

Vapor absorption.

Some refrigeration systems that often use ammonia as the refrigerant are known as vapor-absorption systems. The ammonia usually flows through a condenser, expansion valve, and evaporator just as in a vapor-compression cycle. In vapor-absorption systems, however, the compressor is often replaced by an absorber-generator-pump assembly in which the ammonia is absorbed into water as heat is removed. The liquid ammonia-water solution is pumped and heated to drive off the ammonia vapor and is then sent back into the refrigeration system.

Vapor-absorption systems may be used in large industrial applications, especially when low-pressure steam is available as a heat source. Less power is required to pump the liquid water-ammonia mixture than to compress a vapor. However, vapor-absorption refrigeration requires large heat-removal systems, and there is a danger of ammonia leakage. Other absorption systems that use lithium bromide as the absorbent and water as the refrigerant have been used in large central air-conditioning units.

Air cycle.

Some refrigeration systems, called air-cycle systems, use air as the refrigerant. In these systems moderately cool air from the refrigerated section is first compressed and then cooled by an external cooling system or by the surroundings. This cooled compressed air then expands through a turbine, where, as it expands, both the temperature and pressure are lowered.

Because large amounts of air must be circulated through air-cycle refrigerating systems, they are more expensive than other methods of refrigeration. Air-cycle systems were more widely used before the development of modern nontoxic refrigerants. Today air-cycle systems are used only in a few, specialized applications, such as in some aircraft air-conditioning systems.

Thermoelectric.

In 1834 the French physicist Jean Peltier discovered that when an electric current flows through a circuit in which two different metals are joined, one of the junctions gets cooler, and the other gets warmer. This effect, called the Peltier effect, can be enhanced by substituting certain semiconductor materials for the metals A thermoelectric refrigerator can be made by placing many junctions in series separated by a plate so that heat is absorbed on one side and dissipated on the other. The effectiveness of thermoelectric refrigerators is low because the junctions must be made short to decrease electrical resistance. This shortening results in greater heat transfer through the assembly and thus decreases the refrigerator's overall cooling performance. Consequently, thermoelectric units have so far been limited to a few specialized areas of application.

Applications

In the industrialized nations and affluent regions in the developing world, refrigeration units are used chiefly to store foodstuffs. Most household refrigerators and freezers use vapor compression. Usually the refrigerant passes through chiller plates in the freezer section that contain coils. The refrigerant is partially evaporated and then continues to the main refrigeration compartment. Small fans circulate the cold air, which would otherwise settle at the bottom of the unit.

Water vapor from the main storage compartment tends to freeze on the cold chiller plates, causing a buildup of ice that reduces the cooling ability of the refrigerator. Thus, refrigerators require periodic defrosting in order to keep them working properly. This may be done manually by shutting off the refrigerator and either heating the cooling coils or allowing them to remain at room temperature until the ice melts. Automatic defrosting, or so-called frost-free, refrigerators heat the coils automatically at timed periods, usually by passing hot condenser gas to the coils or by rapidly adding heat from electrical resistors..)

Refrigeration is also used to preserve foods in cold-storage warehouses until the food can be shipped to supermarkets and other stores. Temperatures are usually maintained at slightly above 32° F (0° C) to prevent the foods from actually freezing. In most cold-storage warehouses, an external refrigeration system cools a mixture of water and salt or water and antifreeze. (Such a mixture has a lower freezing point than does pure water.) The mixture is then circulated through pipes that run through the warehouse.

Early refrigerated trucks, ships, and railcars that were used to transport foods and other materials were cooled by large blocks of ice. Today there are separate refrigerators—often powered by small diesel engines—for each storage compartment.